Sleutel Punten Voor Kiezen A Coating Dikte Meter
1. Koper en chroom lagen op plastic: It is recommended to use a coulometric thickness gauge (which will damage the coating) or an X-ray thickness gauge (non-destructive measurement). If the koper layer is 10m~200m, an eddy current method thickness gauge (non-destructive Measurement).
2. Gegalvaniseerd laag op metaal onderdelen% 3a voor voorbeeld % 2c an economisch magnetisch inductie methode dikte meter (niet-destructief meting) moet worden gebruikt op het staal substraat. Voor andere metaal substraten% 2c gebruik a coulometric dikte meter (die zal vernietigen coating) of an X-ray dikte meter (niet-destructief meting).
3. The The electrophoretic paint on the iron substraat should use an economic magnetic induction thickness gauge (non-destructive measurement). For electrophoretic paint on other metal substrates, an economic eddy current thickness gauge (non-destructive measurement) should be used for the paint.
4. Droog Film verwijst naar de uitgeharde verf coating.
5. Refer naar item 2 en item 1 voor de chrome plating laag.
6. Only the chipping method (PIG, which will destroy the coating) is used for painting the interior and exterior parts of the car. The ultrasonic method (non-destructive measurement) can measure the coating above 10 microns, but sometimes it cannot beseft detected.
7. Prijs: 60,000 to 30,000 for the magnetic induction method and eddy current method; 8,000 to 60,000 for the Coulomb method; 55,000 to 60,000 for the ultrasonic method; 250,000 to 400,000} voor de röntgen dikte meter.
